Table of Contents
Advertisement
Electric water heater EKA, EKR, EWH, EKL
6. Temperature setting
For easier adjustment, the button to adjust the temperature controller of the electric heater
has 4 main settings. These are:
Setting:
Protects the storage tank against freezing (up to 30 °C)
Approximately 40°C, hand-hot storage water
Approximately 65°C, moderately hot storage water – it is recommended to
use this setting to prevent accidental scalding with excessively hot water.
If this setting is selected, the operation of the device is extraordinarily eco
nomical.
Heat losses are small and the build-up of limescale is largely prevented.
Low standby energy consumption.
Approximately 85°C, hot storage water
N.B.:
Setting the control button all the way to the left does not switch off the heater (no zero setting).
If the device is operated on daytime current, it is recommended to set the temperature cont-
roller to max. "Pos " ( approximately 65°C).
Due to the hysteresis of the temperature control (± 7°K) and possible radiation losses (cooling-
down of the pipelines), the temperature specifications are subject to an accuracy of ± 10°K.
EWH
6
EKR, EKA
Id.Nr.: 228843-13
Advertisement
Table of Contents
