Main Features - Denon DN-M2300R Operating Instructions Manual

The DN-M2300R is a rack-mount type double MD recorder equipped with a variety of easy-to-use functions.
MD 1 is for playback only.
MD 2 is for both playback and recording.
[PLAY FUNCTION]
• Instant Start (Playback starts less than 0.03 seconds after the PLAY button is pressed.)
• Hot Start function
Up to five tracks can be preset and played immediately.
• Auto Cue
After a track is selected it is automatically cued to the point where audio starts.
Cueing tracks place at the point where audio starts rather than where the track starts. The level at which sound is first detected can be set
between –36 to –60 dB (5 steps).
• Pitch Control (+8 to –8 %, 0.1 step)
Pitch control with an analog feeling using a pitch slider.
• Pitch Bend (The already adjusted pitch can be changed temporarily.)
• Seamless Loop
Any section can be played repeatedly with no interruption in the sound.
• 1/ALL track Repeat mode
• Play mode and Finish mode
1) Play mode
q Continuous: Play a whole disc
w Single: Play a track
2) Finish mode (Stop, Next, Recue)
q Stop: Stop after finishing to play a track
w Next: Cue at the beginning of next track after finishing to play a track
e Recue: After finishing to play a track, cue at the beginning of the track
• End Of Message (EOM)
At the end of a track, the EOM and TRACK NO. flashes, providing a visual warning to the operator that the track will end shortly. The point at
which the flashing begins can be set within a range of 5 to 90 seconds (7 steps) prior to the end of the track.
• Program Play (Max. 25 tracks)
1) When the PLAY mode is set to Single, the player stands by at the beginning of next track.
2) When the PLAY mode is set to Continuous, the playback is continued according to your programmed sequence.
[RECORD FUNCTION]
• Auto Level Rec start
This function automatically starts the recording operation when an audio signal level from an external unit connected to the DN-M2300R exceeds
the preset level (–36 to –66 dB, 6 steps and off).
• Auto Track Increment
DN-M2300R detects the silent portion of the program material and automatically increases the track number. The level of the silent portion can be
set within a range of –36 to –60 dB (5 steps).
• Stereo/Mono recording (74/148 min.)
• Using CUE Signals to make searches (Up to 5 points per track)
• Editing
1) Basic Editing
• DIVIDE: Smallest edited unit is 11.6 msec (1 sound group)
• ERASE TRACK/DISC/CUE
• COMBINE
• MOVE
• TRACK NAME
• DISC NAME
Up to 100 characters can be used for each name, however, the combined total number of characters cannot exceed 1700.
2) Cue signals also can be edited. (Can be erased, rewritten, or added to later.)
• Undo function
Undo function during editing. (Up to 2 editing operations prior to the most recent one can be undone.)
• SCMS
Recording is possible without reception of the copy defeat restriction. Writing of the copy defeat code is selectable.
• 1 / 2 SYNCHRO REC
This is a function for easily recording tracks from MD 1 onto MD 2.
• 19 inch Rack Mountable (Height:
• Large FL Display
• Track Search Select knob (Easy track selection)
• Search/Scan dial
Perform searches to 1 sound group precision using the dial and easy scans using the scan dial.

MAIN FEATURES

Player: 2 U Remote: 3 U)
ENGLISH
7