Setting > Firmware Update - Datavideo NVS-25 Instruction Manual

H.264 Network Video Streaming Server
NVS-25
11. Setting > Firmware Update
Datavideo usually releases new firmware containing new features or reported bug fixes
from time to time. Customers can either download the NVS-25 firmware as they wish or
contact their local dealer or reseller for assistance.
This section outlines the firmware upgrade process which should take approximately
10 minutes to complete.
The existing NVS-25 settings should persist through the firmware upgrade
process, which should not be interrupted once started as this could result in a non-
responsive unit.
Successful firmware upgrade on NVS-25 requires:

The latest firmware file, which can be obtained from your local Datavideo
dealer or office.

A computer with web browser on the same IP network as the NVS-25.

The current NVS-25 IP address and settings.
1. Log into the NVS-25 server on the computer web browser.
2. Click on Settings Tab and turn Stream OFF under Stream Server Option; click
on apply.
3. Select Firmware Update and Browse to the latest firmware file.
4. Click on the Start button to upgrade the NVS-25 to the latest firmware.
Note: After firmware upgrade, you may need to re-locate the NVS-25 on the network;
please refer to the section on
instructions. Settings of the unit need to be restored to settings prior to firmware
upgrade.
30
How to find NVS-25 on an IP network for further