Rtmp Publish Url - Datavideo NVS-25 Instruction Manual

The "Repeat Every" option gives the user the ability to set the frequency of the stream
after the stream time is determined. Again, select number of months from the first pull
down menu, number of days from the second pull down menu and number of hours
from the third pull down menu. For example, if you would like to repeat the stream every
12 hours, simply click the second pull down menu and select 12 Hours.
After all settings are determined, click the Apply button.
NOTE: All settings applied will not be in effect unless the Apply button has been clicked
and the NVS-25 configuration progress bar indicates 100% completion.
The user can also enable "Auto stream at startup" so that the original settings persist
through the power cycle process.
8.5

RTMP Publish URL

Two options and four text bars will appear when RTMP Publish is selected under the
Stream Server Selection Option. Enable the desired options and enter the
corresponding information to stream your video to your Content Delivery Network.
•
Audio Only: Check to enable Audio Only streaming (Enable Pattern
Generator accompanying this setting; Pattern Generator generates color
bars when video signals are absent and can be enabled in Encoder Setup
H.264 Network Video Streaming Server
NVS-25
19