H.264 Network Video Streaming Server
NVS-25
9.7
Audio Setup
Audio Source can be fed into the NVS-25 in two ways. One way is to embed audio into
digital video stream such as HDMI and SDI [DIGITAL] and another way is to feed audio
into a separate analog XLR/RCA phono inputs [Analog]. Select your audio source first
as shown in the diagram below.
Since analog audio levels of the standards in EBU and SMPTE regions are different,
thus audio standard option also needs to be taken into consideration. The audio
standard settings can be found under the Analog Audio System Menu.
NOTE: All settings applied will not be in effect unless the Apply button has been clicked
and the NVS-25 configuration progress bar displays 100% completion.
28