Time Cook - GE JKP62G Use And Care Manual

I
MICROWAVE OVEN
How to Use the Minute/Second ~mer
The MIN/SEC TIMER has three
timing functions:
It operates as a minute timer.
It can be used as a hold setting
after defrosting.
The MIN/SEC TIMER operates
without microwave energy.
How to
Time a 3-Minute
Phone Call
1.
Touch MIN/SEC TIMER pad.
The display shows ": O" and
"ENTER TIME" flashes.
2. Touch number pads 3,0 and O
(for 3 minutes and no seconds).
Display shows "3:00" and
3. Touch START. Display shows
time counting down.
4. When time is up, oven signals,
flashes "TIMER1' and displays ": O",
5. Touch MIN/SEC TIMER pad to
reset display to clock, microwave
cook or defrost programs.
Using a Holding Time
The Minute/Second Timer can also
be used to program a holding time
between microwave cooking
functions. The time can range
from one second to 99 minutes and
99 seconds. A holding or standing
time may be requested in some of
your own recipes or cookbook.
Programming Delayed
Cooking
To delay cooking up to 99 minutes
and 99 seconds, touch TIME COOK,
ROAST pad and enter cook time,
TIMER and enter number of
minutes to delay cooking. Touch
START pad. Timer will count
down to zero and cooking will
begin. When delaying temp. cook
or auto roast, be sure probe is in
food before pressing START pad.
16
I
How to Defrost, Hold and

Time Cook

Let's say you want to defrost a frozen
casserole for 15 minutes, hold for
10 minutes and then Time Cook for
25 minutes. Here's how to do it:
Step 1: Take casserole from freezer
and place in oven.
Step 2: Touch TIME DEFROST
pad.
The display shows ": O" and
"POWER 3:' "ENTER MICRO
DEF TIME" flashes.
Step 3: Touch pads 1,5,0 and O
for 15 minutes defrosting time.
(Defrosting is automatically set on
power level 3 but can be changed
by touching the POWER LEVEL
pad and the desired power level.)
Step 4: Set standing or holding
time by touching MIN/SEC
TIMER. The display shows ": O"
and "ENTER TIME" flashes.
Step 5: Touch 1,0,0 and O to hold
for ten minutes. "10:00" appears
on display and "TIME" flashes.
Step 6: Touch TIME COOK pad.
The display shows ": O" and
"POWER 10:' "ENTER MICRO
COOK TIME" flashes.
Step 7: Touch 2,5,0 and O for 25
minutes of cooking time. "MICRO
COOK TIME" flashes and "25:00"
and "POWER 10" appear on the
display.
Step 8: Touch START pad.
"MICRO DEF TIME" and
the display. As each function is
automatically performed, the oven
display shows instructions entered
and the function.
Step 9: When time is up, the oven
signals, flashes "End" and shuts off.
Questions and Answers
Q. What will happen if I
accidentally reverse my defrost,
hold and cook instructions?
A.
The oven will automatically
rearrange your program. Defrosting
will always come first, then hold,
and then the cooking function.
Q. Can I defrost and hold only?
A. Yes. Sometimes you may only
want to defrost a food, hold it, and
cook it later. All you need to do is
program in defrost and amount of
time. Then program hold and the
amount of time. Be sure to put the
thawed dish in the refrigerator
promptly.
temperature only as long as safe.
Times will vary.