Midland BT City Instruction Manual page 27

Using the BTSki Audio Kit accessory (optional)
This optional kit is the Bluetooth solution designed for winter sports
(use without helmets or with semi rigid type ski helmets). The audio
system is made up of two ultra thin stereo speakers and a boom mike,
all contained in a soft material lining
The audio system includes two ultra-flat stereo speakers and one mi-
crophone with boom, all assembled into a earwarmer headset.
Fitting and removing your Midland BTCity
The BTCity can be easily fitted by sliding it downwards so that it fits
into the slot of the fixing device.
BTCity is maintained in position thanks to the fixing clip located on
the upper section (A).
To detach the BTCity, simply press the fixing clip and push the unit
upwards.
Using the BTCity without helmet
After have fixed your BTCity on its suitable tool and have inserted the
audio kit plug into the central socket, wear your earwarmer headset
12
A
as shown in the figure. Please, be sure to have placed the microphone
in the right way, with the white sign oriented towards your mouth.
Using the BTCity with a semi-rigid helmet
To place the BTCity into a semi-rigid helmet you should first of all
remove the little triangular pads, used to cover the ears in most of
helmets on sale, and then put your helmet directly on the earwarmer
headset audio system.
Be sure the BTCity unit is placed between the two "V" shapes strap.
If your helmet is not equipped with the two removable pads, you
could anyway mount your BTCity system by using the supplied Velcro-
band. Be sure to fix the Velcro-band as shown in the figure.