Midland BT City Instruction Manual page 22

Making a call
There are several ways to make a call.
From the mobile keypad:
› Dial the number on the mobile keypad:
› Press "Send" on the mobile phone.
To redial the last number:
› Press and hold "Volume+" button for 3 seconds in order to redial
the last number (you will hear one audio confirmation tone).
To make a voice call:
› Press "Volume-" button for 3 Seconds. If your mobile phone
supports voice calls, you will be asked to speak the name of the
contact you wish to call.
Priority: Calls have a high priority, which means that all other commu-
nications are temporarily disabled when a call arrives and automatically
re-enabled once the call ends.
Ending a call
There are several ways to end a call:
› Wait for the called person to end the call.
› Press the "Control" button for 3 seconds (you will hear an audio
confirmation tone).
› Press "End" button on the mobile phone.
Using the MP3 player feature of the mobile phone
Many mobile phones are now designed to be used as stereo MP3
players. The BTCity device fully supports the A2DP and AVRCP proto-
cols that enable you to listen to stereo music and remotely control
your mobile phone's MP3 player. You can even use the buttons on the
BTCity unit to control the following play options: Play, Pause, Forward
and Backward.
Volume -
backward
Available controls:
› To play/pause music: click the "Control" button.
› To skip forward to the next song: keep pressed the "Volume+"
button.
› To skip backwards to the previous song: keep pressed the
"volume-" button.
Priority: the music listening mode has the lowest priority. Therefore, it
will always be disabled when another type of communication is ena-
bled.
Pairing to a GPS navigator
The GPS can be paired to the "Volume + " or "Volume -" button. If
the GPS is paired on "Volume +", the street voice announcement will
interrupted all the other communications (Intercom, Music). If the
GPS is paired on "Volume -" all the street announcement will be in
background (and will not interrupted the Intercom communications).
Attention: If you need to connect both Phone and GPS, you must pair
the GPS to the "Volume +" button and the Phone to the GPS it self (not
anymore to the "Volume -" button).
Attention: remember to switch off all the other Bluetooth device, only
the two devices involved in the pairing must be turned on.
Volume+
forward
Control
Pause/Play
7