Selecting Cds - Mercedes-Benz COMAND Operator's Manual

Audio
CD changer* operation
i
CDC
The soft key is shaded out if no CD
is loaded. The system will not switch to
CD changer mode.
Load an audio CD into the CD
changer ( page 71).
CDC
The soft key will only be visible if a
CD changer is connected.
The CD changer main menu appears.
You will hear the CD listened to last. If
this CD is no longer available, the unit
plays the next available audio CD.
The status bar also contains:
The track number and total number
of tracks on the current CD
The elapsed playing time of the
track
76
1 CD name or CD number
2 Elapsed track playing time
3 Track number/total tracks
4 Track title or track number
The CD changer main menu shows the CD
title at the top and track title in the center
of the main area if the CD contains corre-
sponding text data.
If the CD does not contain any CD text da-
ta, the number of the CD and the track
number are displayed instead of the name
of the CD and the track title.

Selecting CDs

The numbers 1 through 6 are assigned to
the CD compartments of the CD changer.
Available choices:
Selecting via CD list
Selecting via direct entry of the CD
number ( page 77)
Selecting via CD Selection menu
( page 77)