Ipsec Peer Identity - Draytek Vigor2820 Series User Manual

IPSec Security Method
3 . 9 . 4 I P S e c P
3 . 9 . 4 I P S e c P
To use digital certificate for peer authentication in either LAN-to-LAN connection or
Remote User Dial-In connection, here you may edit a table of peer certificate for selection.
As shown below, the router provides 32 entries of digital certificates for peer dial-in users.
Set to Factory Default
Index
Name
Click each index to edit one peer digital certificate. There are three security levels of digital
signature authentication: Fill each necessary field to authenticate the remote peer. The
following explanation will guide you to fill all the necessary fields.
Vigor2820 Series User's Guide
e e r I d e n t i t y
e e r I d e n t i t y
Confirm Pre-Shared Key- Retype the characters to confirm
the pre-shared key.
Medium - Authentication Header (AH) means data will be
authenticated, but not be encrypted. By default, this option is
active.
High - Encapsulating Security Payload (ESP) means
payload (data) will be encrypted and authenticated. You may
select encryption algorithm from Data Encryption Standard
(DES), Triple DES (3DES), and AES.
Click it to clear all indexes.
Click the number below Index to access into the setting page
of IPSec Peer Identity.
Display the profile name of that index.
131