SOYO SY-6BB V1.0 Quick Start Manual page 3

Introduction
1
1
Congratulations on your purchase of the SY-6BB V1.0 Mainboard. This Quick Start Guide
describes the steps for installing and setting up your new mainboard.
This guide is designed for all users to provide the basic steps of mainboard setting and
operation. For further information, please refer to SY-6BB V1.0 Mainboard User's Guide and
Technical Reference online manual included on the CD-ROM packed with your mainboard.
Unpacking
* If your board comes with a driver disc and a paper manual, the Quick Start Guide and the CD-ROM are not included in the package.
When unpacking the mainboard, check for the following items:
u
The SY-6BB V1.0 82440 BX AGP/PCI Mainboard
u
This Quick Start Guide
u
The Installation CD-ROM
u
The CPU Retention Set
u
One IDE Device Flat Cable
u
One Floppy Disk Drive Flat Cable
u
One dual 25-pin parallel with 25-pin flat cable and 9-pin
serial with 9-pin flat cable external connector
u
One dual 6-pin PS/2 mouse connector with 6-pin flat cable
and 9-pin serial connector with 9-pin flat cable
SY-6BB V1.0 Quick Start Guide
3