CONVERTA DRAWER REMOVAL AND REINSTALLATION
CONVERTA DRAWER REMOVAL
wCAUTION
• Care should be taken to avoid product or property
damage when removing the converta drawer. It
maybe necessary to have assistance with the
following insturctions.
CONVERTA DRAWER
1
Fully extend the converta drawer. Lifting up
and out to remove the drawer and ice bin
making sure to clear the rail system.
1
3
Remove one white screw
the rails.
Holding both sides of the door pull up to
separate the door from the rails.
wCAUTION: When you remove the drawer, do not hold the handle. It may come off and it could cause
personal injury.
wCAUTION: When placing the drawer on the floor, care should be taken to avoid floor damage.
14
on each side of
• To avoid damage do not hold the handle when
removing the door. It could come off and cause and
injury.
2
Remove the cover of housing by pulling
upside.
Detach the rail housing from the case.
5 4
With both hands, bend the center bar just
enough to allow the gears on both ends to
release from their tracks.