Table of Contents
Related Manuals for Gastroback 42639
Summary of Contents for Gastroback 42639
-
Page 1: Operating Instructions
Operating Instructions Design Coffee grinDer ADvAnCeD Pro Art.-Nr. 42639 Design Coffee Grinder Advanced Pro Read all provided instructions before first use! Model and attachments are subject to change! For household use only! -
Page 2: Table Of Contents
Carefully read all provided instructions before you start running the appliance and pay regard to the warnings mentioned in these instructions. Table of Contents Knowing Your Design Coffee Grinder Advanced Pro ..........28 Important Safeguards ..................30 General Safety Instructions ................30 Important Safeguards for Electrical Appliances ........... - Page 3 Dear Customer! Congratulations! A series of new possibilities come with your new Gastroback Design Coffee Grinder Advanced Pro. This new Coffee Grinder will prove itself by its outstanding adaptability and smart modes of operation. Your Coffee Grinder provides always freshly ground coffee for your special coffee delight by automatically adapting the amount to your pre-selections.
-
Page 4: Knowing Your Design Coffee Grinder Advanced Pro
KnOwIng YOur DesIgn COffee grInDer ADvAnCeD PrO... - Page 5 Conical burr sleeve— slip reducing feet hardened stainless steel for reduced grinding heat n/O Cradles for Portafilter 50-54 mm and 58 mm – for fixing your Portafilter Bean hopper – with locking system under the grind outlet for easy removal and filling grinds container –...
-
Page 6: Important Safeguards
IMPOrTAnT sAfeguArDs Carefully read all instructions before operating this appliance and save for further reference. Do not attempt to use this appliance for any other than the intended use, described in these instructions. Any other use, especially misuse, can cause severe injuries or damage by electric shock, moving parts, or fire. -
Page 7: Important Safeguards For Electrical Appliances
• Do not place the appliance or any part of it on or near hot surfaces (e.g. burner, heater or oven). Do not use any parts of the appliance with any other device or for any other purpose. Before operation, always ensure that the appliance is assembled completely and correctly according to the instructions in this booklet. Do not handle the appli- ance or any part of it with violence. -
Page 8: Moving Parts
Thus, ensure to keep the bean hopper lid firmly closed during operation. Additi- onally, keeping the bean hopper lid closed will prevent unnecessary loss of flavour and taste. TeCHnICAL sPeCIfICATIOns Model: Art. No. 42639 Design Coffee Grinder Advanced Pro Power supply: 220-240 V AC, 50 Hz Power consumption:... -
Page 9: Safety Concept
safety Concept wArnIng: For your protection and convenience, your new Coffee Grinder is equipped with various safety features. Do not attempt to damage or by-pass the safety interlocks! Do not attempt to operate the appliance using others than the designated parts (e.g. bean hopper or burr sleeve). To avoid injuries due to the milling works, for operation the bean hopper must be locked on the grinder via a safety interlock. -
Page 10: Tips For Best Results
energy saving feature In general, it is best to avoid leaving any electrical device connected to the power supply needlessly. Thus, always unplug the appliance from mains power outlet, when not in use. The pre-selections you adjusted for grind size (COARSE to FINE) and amount per cup/shot (GRIND AMOUNT) will remain unchanged. The appliance will automatically switch off when not used for more than 5 minutes. In this case, the screen and all buttons get dark. -
Page 11: Before First Use
BefOre fIrsT use wArnIng: DO nOT let young children play with the appliance, or any part of it, or the packaging! 1. Unpack the appliance and all accessories carefully. 2. Check that no parts are damaged or missing. (See: ›Knowing Your Design Coffee Grinder Advanced Pro‹) 3. Carefully remove all shipping materials and promotional materials, but DO nOT remove the rating label. Especially ensure that there are no foreign objects (e.g. packaging materi- al)in the interior of the bean hopper or milling works. -
Page 12: Operating Your Design Coffee Grinder Advanced Pro
2. Ensure that the burr sleeve is assembled correctly in the milling works. There is a red arrow on the burr sleeve that must point to the LOCK mark at the brim of the milling works. For further instructions see Reassembling the Appliance. 3. -
Page 13: Grinding Into Portafilter
• When using filter bags or Portafilter, you may fill the filter basket or Portafilter directly without any need to transfer the ground coffee from another receptacle. • Portafilter possibly fit in one of the supplied cradles. (See: ›Grinding into Portafilter‹) • If you wish to store some coffee powder for later use, you should use the supplied grinds container. See ›Filling the Grinds Container‹ for further instructions. However, any other fitting container will do. Do not store ground coffee for a too long period of time in the container, to avoid loss of quality. -
Page 14: Grinding Into The Grind Container
Tip: You can press the Portafilter button with your finger or by pressing the Portafilter on it. 6. After grinding is finished, remove the Portafilter carefully to avoid spilling the coffee pow- der. If you have used the cradle, simply pull the cradle out. wArnIng: Do not leave the appliance unattended, while it is connected to the power sup- ply. - Page 15 Adjusting the grind Amount Via the GRIND AMOUNT function, you can modify the preset amount to deliver more or less grinds per cup or shot. Thus, you will get your coffee as strong as you prefer, independently from the number of cups/shots you wish to prepare. 1. Correctly prepare the appliance for operation (see: ›Preparing the Appliance for Use‹). 2. Turn the GRIND AMOUNT button. – Turn to the right to increase the amount per cup/shot. –...
-
Page 16: Solving Problems
Adjusting conical burrs Some types of coffee may require a wider grind range to achieve an ideal extraction or brew. A feature of your Design Coffee Grinder Advanced Pro is the ability to extend this range with an adjustable upper burr. We recommend making only one adjustment at a time. AIR TIGHT CONTAINER Unlock hopper... - Page 17 Problem reason The solution Appliance does not Appliance is not Plug power cord into power outlet. Check, start after pressing plugged in! whether power outlet is live. START | PAUSE | CAN- CEL button Appliance is Remove power plug from power outlet. overheated. Leave for 20 minutes to cool down before trying again.
-
Page 18: Care And Cleaning
Problem reason The solution The Portafilter overfills. It is normal for the Tamper the coffee powder. Untamped correct amount of coffee can reach three times the volume of coffee to appear tamped coffee. overfilled in your portafilter. The GRIND SIZE dial Run milling works empty briefly by pressing is tight the START | PAUSE | CANCEL button whilst... -
Page 19: Disassembling The Appliance
For operation the bean hopper is locked on the power base. Do not use violence, when att- empting to remove the bean hopper or release the lock, to avoid damage. Disassembling the Appliance 1. Unplug the appliance and remove the bean hopper lid. 2. -
Page 20: Storage
wise, moisture could get into the milling works and coffee powder could stick to the surfaces and block the milling works. 1. Insert the grind catch tray into the base of the appliance. The grind catch tray is secured via a magnet. -
Page 21: Notes For Disposal
InfOrMATIOn AnD servICe Please check www.gastroback.de for further information. For technical support, please contact Gastroback Customer Care Center by phone: +49 (0)4165/22 25-0 or e-mail: info@gastroback.de. wArrAnTY We guarantee that all our products are free of defects at the time of purchase. Any demons- trable manufacturing or material defects will be to the exclusion of any further claim and within warranty limits of the law free of charge repaired or substituted. -
Page 22: Index
InDex safety interlock ........33 saving energy ........33 abroad operation ........ 31 service ..........43 accessories ......... 30 settings ..........38 amount ..........38 solving problems ......... 39 assembling ......... 42 spare parts ......... 30 automatic mode ......33, 36 storage .......... - Page 23 Gewerbestraße 20 . 21279 Hollenstedt / Germany Telefon +49 (0)41 65/22 25-0 . Telefax +49 (0)41 65/22 25-29 info@gastroback.de . www.gastroback.de...