Hardware Edid Management - Black Box AVS404-H User Manual

Chapter 4: Operation

4.4 Hardware EDID Management

The Video Matrix Switcher provides hardware EDID management to create effective
communication between the display and sources.
In factory default status mode (Status: 0000), the Video Matrix Switcher passes through
the signals directly, and the input and output device process the signal automatically.
You can invoke other saved EDID data by adjusting the 4-pin EDID DIP switcher or
sending the corresponding RS-232 command.
Via 4-pin EDID DIP switcher
TheVideo Matrix Switcher has a 4-pin EDID DIP switcher to manage EDID. Dial the
switchers to select EDID data.
• Embedded EDID data: 10 sets in total, the chart below illustrates the 10 Embedded
EDID data.
Number
1
2
3
4
5
6
7
8
9
10
NOTE: EDID Information listed is the above chart is factory default data. Embedded
EDID data can be updated by sending command UpgradeEDID[x]..
Page 40
Table 4-3. EDID information vis DIP switch.
Switcher Status
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
877-877-2269 | blackbox.com
EDID Information
720P 2D 5.1CH
720P 3D 5.1CH
720P 2D 2CH
720P 3D 2CH
1080P 3D 5.1CH
1080P 2D 5.1CH
1080P 3D 2CH
1080P 2D 2CH
2160P 2D 5.1CH
2160P 2D 2CH