Control The Switcher Via Web-Based Gui - Black Box AVS404-H User Manual

Chapter 4: Operation
4.3.2 Control Switcher via TCP/IP Communication Software
TCPUDP software example
1. Connect a computer with TCPUDP software to Switcher. Open the TCPUDP software
(or any other TCP/IP communication software) and create a connection, enter the IP
address and port of the Switcher (default IP: 192.168.0.178, port: 8080):
2. Enter commands in the designed area to control the Switcher, see below:
4.3.3 Control Switcher via Web-Based GUI
The Switcher can also be controlled via web-based GUI. This allows users to interact
with the Switcher through graphical icons and visual indicators.
Type 192.168.0.178 in your browser. The log-in interface will appear.
This system is divided into administrator and user modes.
Administrator mode: User name: admin; Password: admin (default setting)
User mode: User name: user; Password: user (default setting).
NOTE: If you log in as admin, you can access more configuration interfaces than if you
log in as user. Here is a brief introduction to the interfaces.
Page 28
Figure 4-4. Login GUI.
877-877-2269 | blackbox.com