Black Box AVS404-H User Manual page 21

Table 4-2 (continued). RS-232 communication commands.
Operation Commands
Command
Undo.
Demo.]
[x]All.
All#.
[x]#.
All@.
[x]@.
All$.
[x]$.
[x]B[y1],[y2],[y3].
BlackscreenON[x].
BlackscreenOFF[x].
Save[y].
Recall[y].
877-877-2269 | blackbox.com
Function
Cancel the previous operation.
Switch to the "demo" mode,
convert input and output in turn
like 1B1, 1B2, ...4B3, 4B4, 1B1...
and so on .The switching interval is
2 seconds.
Switch to normal mode by press-
ing any front panel button or
sending any other command.
Transfer signal from input x to all
outputs.
Transfer all inputs to corresponding
outputs, like 1->1, 2->2...
Transfer signal from input x to out-
put x.
Switch on all outputs.
Switch on output x.
Switch off all outputs, but except
coaxial outputs for digital audio.
Switch off output x.
Transfer AV signal from input x to
output y1, y2, y3
Switch on input x.
Switch off input x.
Save the present operation status
to preset command y, y=0–11.
Recall preset command y, y=0–11.
Chapter 4: Operation
Feedback Example
Undo Ok!
Demo Mode
1 To All.
All Through.
1 Through.
All Open.
1 Open.
All Closed.
1 Closed.
1B2
BlackscreenON1.
BlackscreenOFF1.
Save To F1
Recall From F1
Page 21