Haas+Sohn EN13240 Installation Instructions And Instructions For Use

Multi-fuel stove with heat exchanger
Hide thumbs Also See for EN13240:

Advertisement

Quick Links

Specification:
Our range of products:
HAAS+SOHN
OFENTECHNIK GMBH
Urstein Nord 67
A-5412 Puch
email: office@haassohn.com
http://www.haassohn.com
Multi-fuel stove with heat exchanger EN13240
Installation instructions and instructions for use
Oil stoves
Multi-fuel stoves
Pellet stoves
Glazed tile and slow-burning stoves for wood and coal
Slow-burning stoves and cooking ranges for wood, coal and oil
Fireplace units for wood
Accessories for stove and fireplace
Accessories for the central oil supply
Air humidifiers
Sales and distribution in Germany
HAAS+SOHN Ofentechnik GmbH
Zur Dornheck 8
D-35764 Sinn - Fleisbach
email: info@haassohn.com
Item number 0499132409133
V13 F12

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EN13240 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Haas+Sohn EN13240

  • Page 1 Item number 0499132409133 V13 F12 Multi-fuel stove with heat exchanger EN13240 Installation instructions and instructions for use Specification: Our range of products: Oil stoves Multi-fuel stoves Pellet stoves Glazed tile and slow-burning stoves for wood and coal Slow-burning stoves and cooking ranges for wood, coal and oil...
  • Page 2: Table Of Contents

    Your multi-fuel stove of type BA 1 is tested according to of replacement parts EN13240 ‘Room heaters fired by solid fuel’. Multi-fuel stoves of type 1 (see appliance specification plate) may not You are the owner of a HAAS + SOHN...
  • Page 3: Data For Calculating The Chimney Dimensions According To

    4.1. Safe distances (minimum distances): Warning! The multi-fuel stove may not be used in combined operation with air ventilation devices in your When installing your multi-fuel stove the officially house or apartment. prescribed fire protection regulations must be strictly The operation of this stove is not compromised, if the followed.
  • Page 4: Connection To The Heating System

    chimney. For inserting it into the chimney we recommend Electrical Engineers Association) and the electricity supply using a wall liner. companies are to be observed. When working on electrical components (e.g. the pump With longer lengths of exhaust gas piping horizontal sections and the pipe sensors) it is absolutely necessary to and constrictions should be avoided;...
  • Page 5: Lighting The Multi-Fuel Stove And Heating It

    adjust to the development of heat. By careful heating you some circumstances cause the chimney draught to be will avoid cracks in the insulating bricks, damage to the affected so that exhaust gases are not completely removed. finish and distortion of the materials it is made from. Any In principle the stove should therefore be operated using the possible smells caused by the final drying out of the smallest possible amount of fuel during this transition period...
  • Page 6: Trouble-Shooting

    —————————————————————————————————————————————————————————— 5.10. Trouble-shooting The stove heats badly or produces Remedy: The stove heats badly or Remedy: smoke when: produces smoke when: a stove has been chosen which is Choose the correct size of a supply of fresh air from outside Ventilate the room more too small for the size or the stove.

Table of Contents