Av Board - Philips DVP9000S Service Manual

DISMANTLING INSTRUCTIONS
Dismantling of the DVD Loader
1) The tray can be manually open by inserting a screw
driver and push the lever in the direction as shown in
Figure 1 to unlock the tray before sliding it out.
2) Slide out the tray and remove the Cover Tray assembly
(pos 113 + pos 115 + pos 117) as shown in Figure 2.
3) Loosen 7 screws to remove the Cover Top (pos 197).
- 2 screw each on the left & right side
- 3 screws on the rear
Figure 1
Dismantling of the PSCAN HDMI Board, AV Board, PSU Board and SD5.2 (S) XSA 4FL DV HDMI Board
1) Loosen 3 screws A (see Figure 3 & 4) to remove the
PSCAN HDMI Board (pos 1006).
2) Loosen 7 screws B (see Figure 3) and uncatch C1 (see
Figure 5) to remove the AV Board (pos 1002).
2-1
4) Loosen 4 screws D (see Figure 5) to remove the DVD
Loader (pos 1003-0001).
5) Loosen 3 screws E (see Figure 5) to remove the Plate
Shield (pos 191) from the DVD Loader.
Figure 2
3) Loosen 2 screws G and uncatch 2 catches C2 (see
Figure 5) to remove the PSU Board (pos 1004).
4) Loosen 4 screws F (see Figure 5) to remove the SD5.2
(S) XSA 4FL DV HDMI Board (pos 1003-1001).
Figure 3
Figure 5
Figure 4
Detaching the Cabinet Front assembly
1) Loosen 7 screws H (see Figure 6 & 7) and uncatch 2
catches C3 (see Figure 7) to detach the Cabinet Front
assembly from the Frame (pos 161) by sliding it out
towards the front.
- see Service position C
Figure 6
Figure 7
2-1