Sharp MX-6240N Quick Start Manual page 23

Saddle Stitch
(When a saddle finisher is installed)
Copies can be folded at the center, stapled, and output.
(When a trimming module is installed on the saddle finisher)
For saddle folding, it trims a side drop, offering a good-looking output
image.
Releases saddle stitch
This selects left binding
This selects right binding
Scanning 2-Sided originals
Folding function
(When a saddle finisher or folding unit is installed)
Copies can be folded and output.
Selects saddle fold
Selects Z-fold
Selects C-fold
Selects according fold
Selects double fold
Selects half fold
Tap this to switch the cover setting Off or On, or to
configure the paper tray settings.
Scans 1-Sided originals
1 staple in front
2 Staples
Copies can be folded at the center, stapled, and
output.
This function is only available when a saddle
finisher is installed.
Detail setting screen for each folding type
Folds paper so that the print side faces downward
during output
Folds paper so that the print side faces upward
during output
Select this option to fold multiple sheets together
Displays a folding image
Punch function
(When a punch module is installed)
This function punches copies and outputs them. It is available for paper sizes B5R to A3.
Punches holes during output
23
Trimmer Setting
(When a trimming module is installed on the saddle finisher)
Enabling "Saddle Stitch" allows you to configure the trimmer
settings.
Turns off the trimmer setting
Turns on the trimmer setting
Specify the trimming width
within the range of 2.0 to
20.0 mm
Select the size of paper to be folded with
Z-fold
(One of either 11 x 17, 8-1/2 x 14, 8-1/2 x
11R, A3, B4 and A4R can be selected)
Folds paper for left binding during output
Folds paper for right binding during output
COPY OUTPUT