Cleaning the shaver
2
1
1
1
Insert the appliance
plug.
2
2
Plug in the adaptor.
•
Remove any soap or water on
the shaver if it has been
washed with hand soap or
any other detergent.
Course selection indications
On recharger
Course
CLEAN
DRY
Charge
Clean/Dry/
Charge
Clean/Dry
Dry/Charge
Dry
*The lamp goes out in 6 seconds.
3
3
Remove the
protective cap and
then attach the
shaver.
•
Turn the shaver off before
attaching.
•
Check that the outer foil is not
deformed or damaged when
you are attaching the shaver.
Changeable course
halfway through
CHARGE
*
SELECT
CLEAN
DRY
CHARGE
STATUS
4
4
Press [SELECT] to select the course.
•
Each time you press [SELECT], the course changes from "Clean/
Dry/Charge"
"Clean/Dry"
•
The courses start approximately 6 seconds after they are
selected.
•
The course will be aborted if the power is cut off. In this case,
perform the course again from the beginning.
•
Do not detach the detergent cartridge or the water tank as the
cleaning liquid may spill causing a malfunction.
On shaver
On recharger
CLEAN
DRY
Glows
Glows while
charging
–
Glows while
charging
–
"Dry/Charge"
"Dry"
Course completion summary
Time required
On shaver
(guide) [In the low
CHARGE
Blinks
Blinks
2 hours [+30 min]
–
1 hour [+30 min]
Blinks
–
"Charge".
temperature]
1 hour
2 h 40 min
1 h 40 min
7