Wall Mounting/Installing The Kx-T7545 - Panasonic KX-T7531 Operating Instructions Manual

Wall Mounting/Installing the KX-T7545

Wall Mounting
1
Remove the handset hook by
pulling it up. Turn it around
and re-insert it.
2
Remove the
attached stand.
3
Turn it around
180 degrees.
4
Insert the stand in
the centre slots.
5
Ensure the cords are inserted in the
grooves to prevent damage to the
connectors, and mount the unit on the
wall.
To temporarily place the handset
down during a conversation,
hook it over the
top edge of the
phone as shown.
The illustrations used in this page are a
KX-T7536.
Installing the KX-T7545
The KX-T7545 Add-on Key Module can be
connected to your telephone.
The KX-T7545 has 12 CO buttons.
These buttons are used to seize an outside
line, make a call
using one-touch
dialling, or access
certain features.
<KX-T7531 with a KX-T7545>
1
Open the cover.
2
Attach the KX-T7545
to your telephone with
a screw.
3
Insert the cable into the connector.
4
Close the cover.
* For wall mounting, pull up
as shown below.
B
B
A
Remove A
as shown.
25