Panasonic KX-T7531 Operating Instructions Manual page 5

AUTO ANSWER
Used to answer an intercom call
automatically.
VOICE CALL (KX-T7550 only)
Used to monitor an intercom call
automatically.
MUTE
Used to listen to the other party
without them hearing you. You can
mute the handset microphone or the
microphone.
AUTO DIAL/STORE
Used for speed dialling in the system
or storing program changes.
CONFERENCE
Used to make a three-party conference.
FLASH
Used to disconnect the current call and
make another call with holding the
same outside line.
Flexible Outside (CO) Line Button
Used to make or receive an outside
call, or access a feature if the button is
assigned as a One-touch dialling
button.
Function Button
Used to perform the displayed function
or operation.
FWD/DND
Used to perform Call Forwarding or
Do Not Disturb.
HOLD
Used to place a call on hold.
INTERCOM
Used to make or receive intercom calls.
For KX-T7533 and KX-T7536 Users
The display can be adjusted.
1 Press the LCD ADJ button.
2 Lift or put down the display.
Jog Dial
Used to search the stored telephone
numbers or system features and adjust
the volume or the display contrast.
MESSAGE
Used to leave a notification or call
back the party who left the notification.
MODE
MODE
Used to set the display to access a
feature.
PAUSE
Used to insert a pause in speed dial
numbers or in other numbers.
PROGRAM
Used to enter and exit the
programming mode.
REDIAL
Used to redial.
SELECT
SELECT
Used to select the displayed function
or to call the displayed phone number.
SHIFT
SHIFT
Used to alternate the sub function on
the display.
Soft Button
Used to perform the function or
operation that appears on the bottom
line of the display.
SP-PHONE
Used for the handsfree operation.
MONITOR (KX-T7550 only)
Used for handsfree dialling. You can
monitor the party's voice handsfree.
TRANSFER
Used to transfer a call to another party.
Display
LCD ADJ
button
5