Advertisement
water inlet
3. The .. Automatic Cleaning Progranune" starts by pressing the .. Auto Clean" Button
once and the progranune can be stopped during operation by' pressing the "Auto
Clean" Button again.
N
One Touch Automatic Cleaning Programme:
A. Functions:
The cookerhood shall be cleaned by using the special cookerhood cleaner available
in the market.
After the cleaner is mixed with water (ratio 1:3 ), the cleaner
mixture shall t>e poured into the cleaner storage unit and stored in the cookerhood
for
cleaning later. The
cleaning process works on the centrifugal force and
cleaning power generated by revolving the motors at high speed,It keeps the inside
of the cookerhood clean and prolongs the life of the cookerhood.
B. Operating Instructions:
1. Mix the cleaner and water by pouring water
and the cleaner to the marked level of the
provided jar. (water: cleaner ratio
-+
3: 1)
2. Pour the cleaner mixture in the jar into
Cleaner
storage
the hidden cleaner storage unit of the
unit
cookerhood through the water hole as
shown in the picture. The volume of
the cleaner storage unit is identical to
Excess 'water hole
the volume of the jar.
3. If cleaner mixture comes out from the excess water hole down into the oil retainer, it
means the cleaner storage unit is full and no more cleaner mixture shall be
poured into the unit.
4. Press the .. Auto Clean"
Button to start the motors and the cleaner will be
discharged automatically and cleans the inside of the cookerhood.
5. The oil retainer shall be taken out to remove the dirty oil once the
dirty oil reaches the marked line to prevent spillage.
-3
Advertisement
