Table of Contents
Advertisement
PRE-RIDE CHECKLIST
Deck and Handlebars
Check for cracks or broken connections. Although broken decks
are rare, it is possible for an aggressive rider to run into a curb
or object and wreck and bend or break the deck. Get in the habit
of inspecting your scooter on a regular basis.
Hardware/Loose Parts
Check and secure all fasteners before every ride. Make sure the
pivoting mechanism and the plastic cover are locked properly
in place before riding. There should not be any unusual rattles
or sounds from loose parts or broken components. If the unit
is damaged, do not ride. Reference "Safety Warnings" on
page 1 of this manual.
USAGE
How to Ride
Place one foot on the baseboard and push forward with the other foot. Ride with both hands on the handlebars. To turn,
lean slightly in the desired direction. The "tilt-to-turn" front wheels and axle will cause the scooter to turn. Practice
turning slowly in an open area free of fi xed hazards.
How to Stop
For controlled stops, apply the brake by stepping on the rear fender brake. Razor recommends you practice applying the
brake in an open area free from obstructions before riding your scooter around others.
Safety Gear
Always wear proper protective gear, such as an approved safety
helmet. Elbow pads and kneepads are recommended. Always wear
closed toe shoes (lace-up with rubber soles) and keep shoelaces
tied and out of the way of the wheels. NEVER RIDE BAREFOOTED
OR IN SANDALS.
Laws and Regulations
Always check and obey any local laws or regulations.
Be Careful!
This product is not for aggressive or trick riding. Avoid steep
inclines and don't ride too fast — you can lose control and fall.
Skateboard parks are not designed for young riders. Never ride in
traffi c or on the street and watch your surroundings for pedestrians,
bikers, boarders and skaters.
Maintain a hold on the handlebars at all times.
4
Advertisement
Table of Contents
