Selecting The Wireless Playback Quality Of The Speaker - Sony SRS-X33 Help Manual

Personal audio system

Hide thumbs Also See for SRS-X33:

Table of Contents

Help Guide

How to Use

Personal Audio System

SRS-X33

Selecting the wireless playback quality of the speaker

The "Priority on sound quality" and "Priority on stable connection" modes are available as options for selecting the

wireless playback quality of the speaker. "Priority on sound quality" enables you to playback, not only SBC, but also AAC

and LDAC so that you can enjoy high quality sound via BLUETOOTH, whereas "Priority on stable connection" provides

you more stable wireless playback. "Priority on sound quality" is the default setting.

Supported Codecs

Priority on sound quality: AAC or LDAC, SBC (Default setting)

Priority on stable connection: SBC

1. Connect the speaker to an AC outlet via USB AC adaptor (supplied).

Note

Do not turn on the speaker.

2. While holding the VOL (volume) + button, press the

flashes white.

When the setting is changed to the "Priority on stable connection" mode, the

three times in white.

When the setting is changed to the "Priority on sound quality" mode, the

in white.

Note

Communication may become unstable in the "Priority on sound quality" mode, depending on the setting of your

BLUETOOTH device and ambient conditions. In this case, change the speaker to the "Priority on stable connection"

mode by performing steps 1 and 2 above.

Table of Contents