Sony SRS-X33 Help Manual page 63

Hint
Depending on the BLUETOOTH device, it may be necessary to adjust the volume or set the audio output setting on
the connected device.
When you set the volume to the maximum or minimum, the
Depending on the BLUETOOTH device, you may not be able to adjust the volume of the speaker by the connected
device.
Note
If the communication condition is poor, the BLUETOOTH device may react incorrectly against the operations on the
speaker.
When you connect a portable audio device, etc., to the speaker's AUDIO IN jack while listening to music via
BLUETOOTH connection, the speaker switches to the AUDIO IN mode automatically. In this case, music of the
BLUETOOTH device is not output (if the BLUETOOTH connection is active, the hands-free function is available). To
listen to music from the BLUETOOTH device again, disconnect the audio cable from the speaker's AUDIO IN jack.
Related Topic
How to make a wireless connection with BLUETOOTH devices
Terminating the BLUETOOTH connection (After use)
(power) indicator flashes three times.
4-565-707-11(1)
Copyright 2015 Sony Corporation
59