Table of Contents
Advertisement
For a comfortable sleep, the air conditioner will operate in 3 stages in order of Fall asleep Sound sleep Wake up stage .
When the air conditioner is operating in Cool/Heat mode;
Remote controller display
You can adjust the set temperature by 1 °C within the range of 16 °C~30 °C.
Fan speed will be adjusted automatically according to the
However, If you select
When the
In Cool mode: Air flow direction will be adjusted automatically.
In Heat mode: Adjusting air flow direction is available.
Temperature and fan speed change in
• Fall asleep: Eases you into sleep by dropping the temperature .
• Sound sleep: Relaxes your body and raises your temperature slightly .
• Wake up: Allows you to wake up from comfortable intermittent air and it makes you feel refreshed .
• Recommended set temperature is between 25 °C ~ 27 °C for cooling and 21 ˚C~23 ˚C for heating.
• If the set temperature is too low, you may feel cold during sleep or catch a cold .
• Optimal operation hour of
may not feel as comfortable as you would expect .
• If the
operation time and the air conditioner will stop automatically .
• When the On timer and the
the function that was set later .
NA_BETTER_A3050_IB&IM_EN_DB68-05012A.indd 19
mode
1 . Press the Timer button .
2 . Press the
3 . Press the SET button to set the
- (
) indicator will keep blinking and you can set the time .
4 . Press the
- You can set the time in half hour unit from 30 minutes (0 . 5 on the display) ~
3 hours and hour unit from 3~12 hours .
- Time can be set from minimum 30 minutes to maximum 12 hours .
- Default time setting for the
5 . Press the SET button to complete the
- (
) indicator and the set time of the
the remote controller display .
- Timer indicator ( ) will be displayed on the indoor unit display .
-
10 seconds after setting the time . Therefore, check for the (
remote controller display and the Timer indicator ( ) on the indoor unit display .
f Press the
f
Cancel
and press the SET button .
Additional options available in
mode is on.
mode is 8 hours . Therefore, if the time is set too short or long, you
mode is set over 5 hours, Wake up stage will begin when 1 hour is remaining in the
button until (
) indicator starts to blink .
button to set the time .
mode setting will be cancelled if you don't press the SET button within
button to make the set time to display as
mode
mode while heating operation is on, you can adjust fan speed.
mode
function is set simultaneously, the air conditioner will only apply
English-19
mode .
mode is 8 hours .
mode setting .
mode will be displayed on
) indicator on the
mode.
11/20/2014 3:18:05 PM
,
Advertisement
Table of Contents
