Compensating The Exposure - Panasonic DMC-GH2K Lumix Operating Instructions Manual

[REC] Mode:

Compensating the Exposure

Use this function when you cannot achieve appropriate exposure due to the difference in
brightness between the subject and the background. Look at the following examples.
Underexposed
Compensate the exposure
towards positive.
Press the rear dial to switch to Exposure Compensation operation.
Rotate the rear dial to compensate the
exposure.
A Exposure Compensation value
B [EXPO.METER]
•
The Exposure Compensation value can be set within
a range of j5 EV to i5 EV. When recording motion
pictures, the Exposure Compensation value can be
set within a range of j3 EV to i3 EV.
•
Select [0] to return to the original exposure.
•
Rotate the rear dial to display the [EXPO.METER]. (P132) (However, it does not appear
in ñ / / ¿
Note
•
When the exposure value is out of the j3 EV to i3 EV range, the brightness of the recording
screen will no longer change. It is recommended to record by checking the actual brightness of
the recorded image in the Auto Review or playback screen.
•
The set exposure value is memorised even if the camera is turned off. However, the exposure
value during the Intelligent Auto Mode is not memorised.
•
The compensation range of the exposure will be limited depending on the brightness of the subject.
•
When the aperture and shutter speed values are displayed in the screen in the Programme AE
Mode, Programme Shift operation and Exposure Compensation operation is switched every
time the rear dial is pressed.
•
In the Aperture-Priority AE Mode, Aperture Setting operation (P92) and Exposure
Compensation operation is switched every time the rear dial is pressed.
•
In the Shutter-Priority AE Mode, Shutter Speed Setting operation (P92) and Exposure
Compensation operation is switched every time the rear dial is pressed.
•
Operation method can be changed with [EXPO. SETTINGS] in the [CUSTOM] menu. (P132)
•
Exposure compensation can be performed by touching the exposure compensation display,
and then using the slide bar in the Quick Menu (P55) while in touch operation.
•
In the Quick Menu (P56) while in button operation, if set to [
compensation can be set with 3/4 after selecting to display exposure compensation with
2/1 or the rear dial.
/ / / Mode.)
Properly
exposed
Overexposed
Compensate the exposure
towards negative.
A B
] (LCD monitor style), exposure
VQT3A55
Recording
75