Playing Back Pictures On A Tv Screen - Panasonic DMC-GH2K Lumix Operating Instructions Manual

Hide thumbs Also See for DMC-GH2K Lumix:
Table of Contents

Advertisement

Connecting to other equipment

Playing Back Pictures on a TV Screen

Preparations: Set the [TV ASPECT]. (P59)
Turn this unit and the TV off.
1 Yellow: to the video input socket
2 White: to the audio input socket
3 Red: to the audio input socket
A Align the marks, and insert.
B AV cable (supplied)
Check the directions of the connectors, and plug them straight in or unplug them straight out.
(Otherwise the connectors may be bent out of shape which may cause malfunction.)
Connect the AV cable B (supplied) to the video input and the audio
input sockets on the TV.
Connect the AV cable to the [AV OUT] socket on the camera.
Turn the TV on and select external input.
Turn the camera on and then press [(].
Note
Depending on the [ASPECT RATIO], black bands may be displayed on the top and bottom or
the left and right of the pictures.
Do not use any other AV cables except the supplied one.
Read the operating instructions for the TV.
When you play back a picture vertically, it may be blurry.
You can view pictures on TVs in other countries (regions) which use the NTSC or PAL system
when you set [VIDEO OUT] in the [SETUP] menu.
Audio will be played back as stereo (2ch).
The viewfinder cannot be displayed when connected with a AV cable.
Change the screen mode on your TV if the picture is displayed with the top or bottom cut off.
AV output is disabled when recording.
156
VQT3A55
Playing back pictures using the AV cable (supplied)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dmc-gh2h lumix

Table of Contents