Ir Learning Function - Canton Digital Movie 55 Operating Instructions Manual

IR learning function

the DM system can learn the infrared code of your tV remote control and therefore allows you to control the functions of the Soundbar and
tV device via one remote control. You can allocate the instructions for the Soundbar to any key of the tV remote control. When
choosing a key make sure that the instructions for the Soundbar do not conflict with the tV device. We recommend that you deactivate
the internal loudspeaker of the tV device once the Soundbar is connected.
Hold the tV remote control in position.
1
Switch the Soundbar on.
2
Press and hold the "ON/Standby" key of the Soundbar
3
remote control for approx. 5 seconds.
the display shows a flashing
4
Press the wanted function on the Canton
5
remote control e.g. "Volume +".
Now the display shows the chosen function, e.g.
6
Within 20 seconds press the key you wish to allocate
7
to this function on the tV remote control.
Once this has been successfully allocated the display
8
will show and you can continue with the
O K
programming of the next key function, e.g. "Volume –".
if the display shows F A I
9
has failed and you should repeat steps 5 to 8.
.
I R L
.
v
this means the allocation
ON ON
STANDBY STANDBY
STEREO STEREO
Note: the red "ON/Standby" key on the DM remote control has a
SURROUND SURROUND
dual function. Press it once and the display will show
allows the switching on function to be programmed. if the red "ON/
Standby" key on the DM remote control is pressed twice in quick
BLUETOOTH BLUETOOTH
PAIRING PAIRING
succession the display will show
ing off function can be programmed. if your tV remote control has
only one key for the "ON" and "OFF" functions both the "ON" and
"Standby" functions must still be allocated with this command.efehl
belegt werden.
English
MUTE MUTE
tV remote control
BASS BASS
TREBLE TREBLE
, which
O N
and the Standby or switch-
S T B
51