Table of Contents
Advertisement
Chapter 4
Wall Mounting
This section provides details for final mounting of the RC8325-ADT
Wireless Day/Night HD Camera. You should ensure that the camera is
configured and enrolled in ADT Pulse before permanently mounting it.
1. Locate the mounting plate at the bottom of the camera stand and slide the
mounting plate forward to release it from the stand.
2. Hold the mounting plate at the location where you would like to mount the
camera and mark the location of the two mounting holes.
3. Drill two pilot holes on the mounting surface at the marked locations.
4. Align the two mounting holes on the camera stand with the two pilot holes,
and mount the mounting plate to the surface using the two screws supplied.
5. Slide the camera stand onto the mounting plate until it clicks into place.
RC8325-ADT Wireless Day/Night HD Camera Installation Guide
Figure 5: Installing the Mounting Plate
Figure 6: Mounting the Camera Stand
4
17
Hide quick links:
Advertisement
Table of Contents
