Table of Contents
Advertisement
For Parts Call 606-678-9623 or 606-561-4983
For Parts Call 606-678-9623 or 606-561-4983
Throttle Control Lever
The throttle control lever is located on the right side of
the tractor's dash panel. This lever controls the speed
of the engine and, on some models, when pushed all
the way forward, the choke control also. When set in a
given position, the throttle will maintain a uniform engine
speed. See Figure 9.
IMPORTANT: When operating the tractor with the cutting
deck engaged, be certain that the throttle lever is always
in the FAST (rabbit) position.
Choke Control
On some models, moving the
throttle lever all the way forward
activates the engine's choke
control. On all other models, the
choke control can be found on
the left side of the dash panel
and is activated by pulling the
knob outward. Activating the
choke control closes the choke
plate on the carburetor and aids in starting the engine.
Refer to Starting The Engine in this section of the
manual for detailed starting instructions.
Brake Pedal
The brake pedal is located on
the right front side of the tractor
above the drive pedal along the
running board. The brake pedal
can be used for sudden stops
or setting the parking brake.
NOTE: The brake pedal must
be fully depressed to activate
the safety interlock switch
when starting the tractor.
Ignition Switch Module
WARNING: Never leave a running
machine unattended. Always
disengage PTO, move shift lever
into neutral position, set parking
brake, stop engine and remove
key to prevent unintended
starting.
To start the engine, insert the key into the ignition switch
and turn clockwise to the START position. Release the
key into the NORMAL MOWING MODE position once
the engine has fired.
To stop the engine, turn the ignition key counterclockwise
to the OFF position. See Figure 10.
����
��������
����
��������
����
��������
IMPORTANT: Prior to operating the tractor, refer to both
Safety Interlock Switches and Starting The Engine
in this section of the manual for detailed instructions
regarding the Ignition Switch Module and operating the
tractor in REVERSE CAUTION MODE.
Drive Pedal
The drive pedal is located below the
brake pedal on the right front side of
the tractor along the running board.
Depress the drive pedal with your right
foot when the tractor shift lever is in
either FORWARD or REVERSE to cause
the tractor to move. Ground speed is
also controlled with the drive pedal. The
further down the pedal is depressed, the
faster the tractor will travel. The pedal
will return to its original position when it's
not depressed.
IMPORTANT: Always set the parking brake when leaving
the tractor unattended.
11
www.mymowerparts.com
www.mymowerparts.com
�����
��������
����
��������
����
��������
Figure 9
������
������ ����
�����
��������
Figure 10
4
Operating
Your Lawn
Tractor
WARNING
Never leave a running
machine unattended.
Always disengage
PTO, move shift lever
into neutral position,
set parking brake, stop
engine and remove key
to prevent unintended
starting.
IMPORTANT
Prior to operating the
tractor, refer to both
Safety Interlock
Switches and Starting
The Engine in this
section of the manual
for detailed instructions
regarding the Ignition
Switch Module and
operating the tractor in
REVERSE CAUTION
MODE.
Hide quick links:
Advertisement
Table of Contents
