Panasonic Lumix DMC-ZS100 Basic Owner's Manual page 22

Basics
Shutter button (Taking pictures)
• Press the [
1
Press the shutter button halfway (press lightly) to
focus on the subject
• The aperture value and shutter speed are displayed. (If the
aperture value and shutter speed are shown in red and flashing,
you do not have the appropriate exposure, unless you are using
the flash.)
Focus display
( When focus is aligned: illuminated
When focus is not aligned: flashing)
2
Press the shutter button fully (push the button all
the way), and take the picture
●
Pictures can be taken only when the image is correctly focused as long as
the [Focus/Release Priority] is set to [FOCUS].
●
Even during menu operation or picture playback, if you press the shutter button
halfway, you can instantly set the camera ready for recording.
■
Estimated number of recordable pictures
ZS100
720

1
(When [Aspect Ratio] is set to [3:2], [Quality] is set to [
and using a card of 8 GB)

2
(When [Aspect Ratio] is set to [4:3], [Quality] is set to [
and using a card of 8 GB)
22
SQT1166 (ENG)
] button ( ) to set the drive mode to [
Shutter speed
Aperture value

1
ZS60

2
800
], [Picture Size] is set to [L] (20M),
], [Picture Size] is set to [L] (18M),
] ([Single]).