General Information
To install the windscreen
To install the windscreen, carefully slide the
lower part of the windscreen behind the
indicators. Align the windscreen mounting
slots to the upper and lower mounting points
on the forks.
Note:
•
Audible clicks can be heard when
the locks are engaged.
Slide the windscreen down until the upper
mounting locks have clicked into the locked
position.
Ensure both upper mount locks are locked
and the windscreen is secure.
Warning
To prevent detachment of the windscreen
during riding, after fitting, always grasp the
windscreen and pull firmly upwards. If the
windscreen locks are not correctly secured
the windscreen will detach from the locks.
A loose or detached windscreen could
cause loss of motorcycle control and an
accident.
Warning
After fitting or removing the windscreen,
operate the motorcycle in a safe area free
from traffic to gain familiarity with the new
handling characteristics. Operation when
not familiar with the new characteristics of
the motorcycle may result in loss of control
and an accident.
34
Pannier System
MAX LOAD
7 kg (15.4 lbs)
To remove the panniers
Note:
•
The
same
procedure
followed to remove and mount the
left hand or the right hand pannier.
1
2
3
cens
1. Quick release fixings
2. Pannier lower mountings
3. Pannier rail
To remove the pannier from the pannier rail,
open the lid of the pannier and turn the two
quick release fixings 90° anti-clockwise. Lift
the pannier free from the pannier rail.
can
be
1
2