Computer Stops Operating During Scanning - Canon PIXMA MG5550 Series Online Manual

Computer Stops Operating during Scanning

Check 1: Restart the computer, reduce the output resolution in
ScanGear (scanner driver) and scan again.
Refer to "Output Settings" for your model from Home of the Online Manual for details.
Check 2: Delete unnecessary files to obtain sufficient free hard
disk space, then scan again.
Error message may appear if there is not enough hard disk space to scan and save, when
the image size is too large (such as when scanning a large item at high resolution).
Check 3: In Folder to Save Temporary Files of IJ Scan Utility,
specify a folder on a drive with sufficient free space.
Settings (General Settings) Dialog Box
Check 4: Multiple devices may be connected to USB ports.
Disconnect devices other than your scanner or printer.
71