A tilted support
1. Prepare a tilted support.
Top view
NOTE
1. The hole dimensions of the bottom auxiliary tightening point in the top view are OB-13 mm x 8
mm (OB-0.51 in. x 0.31 in.).
2. The hole dimensions of the backplane tightening point in the front view are OB-32 mm x 12 mm
(OB-1.26 in. x 0.47 in.).
3. The bottom auxiliary tightening point is 5 mm (0.20 in.) away from the backplane tightening point
below.
2. Secure the tilted support mounting kit to the inverter.
4. (Optional) Secure the auxiliary screws to the
inverter.
Front view
M6 (8 PCS)
4 N· m
M6(2 PCS)
4 N· m
NOTE
1. The anti-theft lock is prepared by the customer.
2. For details about how to wall-mount the device, see the SUN2000-
(25KTL, 30KTL)-US User Manual.
3
Side view
3. Secure the inverter to the tilted support.
M8(4 PCS)
8 N· m
5. (Optional) Install an anti-theft lock.