Advertisement
1374-7205-00(KF10_KF20_KF10R_KF20R)_EN_V4:_
KF10
KF10LL
KF10R
Ionisation
EN14604:2005
LICENSE NO. KM 524754
INSTALLER: Please leave this user guide with the product.
Model KF10, KF10LL Ionisation 230V AC smoke alarm with 9V
Model KF10R
Model KF20,KF20LL
Model KF20R
• Interconnects with up to 23 other models, KF1, KF1R, KF2, KF2R, KF3, KF3R,
KF10, KF10LL, KF10R, KF20, KF20LL, KF20R, KF30, KF30LL, KF30R, 4870,
4881, 4973, 4985, 4892, 4899, 1SFW, 1SFWR, 2SFW, 2SFWR, 3SFW, 3SFWR,
and 4MCO and 4MDCO Mains CO alarms. Unique power connector prevents
interconnection with incompatible smoke alarms or security systems.
• Tamper-resist bracket quickly snaps into place and serves as a safeguard
against tampering.
• Multi-purpose green and red LEDs indicate that the smoke alarm is receiving
AC power, working under normal operation, in alarm, or under Hush Button.
• Loud alarm horn—85 decibels at 3 metres (10 feet)—sounds to alert you of
an emergency.
• Test button checks smoke alarm operation.
• All models feature Hush Button, which, when activated, quiets unwanted alarms
for up to 9 minutes.
• Models KF10, KF10LL, KF20 and KF20LL will not attach to the mounting
bracket if a battery is not in the battery pocket. These models will also sound
a short beep about once a minute if the battery is weak or improperly con-
nected.
• Models KF10R , KF20R , KF10LL and KF20LL have lithium batteries that will
last the life of the alarm and a tamper-proof locking screw option.
• Models KF10R and KF20R include permanent rechargeable lithium
batteries.
• Operating temperature: 0°C to 40°C
• Operates up to 93% humidity (non-condensing)
IMPORTANT SAFETY INFORMATION
PLEASE READ AND SAVE THESE
!
• DO NOT paint or cover the smoke alarm with tape.
• This smoke alarm should be out of the reach of children.
• AC smoke alarms require constant 230V AC, 50Hz power to operate
properly. Mains-powered smoke alarms WILL NOT work if AC power is not
connected or has failed or been interrupted for any reason. Models KF10,
KF10LL and KF20, KF20LL require a working 9-volt battery to operate prop-
erly in the event of a power failure. Models KF10R and KF20R require a
minimum of 2 full days under mains power to reach full backup capacity. DO
NOT use any other kind of battery except as specified in this user guide. DO
NOT connect this smoke alarm to any other type of smoke alarm or auxiliary
device, except those listed in this user guide.
• DO NOT remove or disconnect battery or turn off AC power to quiet
unwanted alarms. This will remove your protection. Open windows or fan the air
around smoke alarm to silence it. KF10, KF10LL, KF10R, KF20, KF20LL and
KF20R smoke alarms feature a Hush Button which, when activated, will quiet
unwanted alarms for up to 9 minutes.
User uide
PLEASE READ AND SAVE
SMOKE ALARM DESCRIPTION
battery back-up and Hush Button
Ionisation 230V AC smoke alarm with recharge-
able battery backup and Hush Button
Optical 230V AC smoke alarm with 9V
battery back-up with Hush Buttonl
Optical 230V AC smoke alarm with rechargeable
battery back-up and Hush Button
SMOKE ALARM FEATURES
INSTRUCTIONS
W
A
R
KF20
KF20LL
KF20R
Optical
0086-CPD-535595
14
EN 14604:2005
N
I
N
G
1
2014.11.20
10:16 A
Advertisement
Table of Contents
Related Manuals for Firex KF10
Summary of Contents for Firex KF10
- Page 1 • All models feature Hush Button, which, when activated, quiets unwanted alarms for up to 9 minutes. • Models KF10, KF10LL, KF20 and KF20LL will not attach to the mounting bracket if a battery is not in the battery pocket. These models will also sound a short beep about once a minute if the battery is weak or improperly con- nected.
- Page 2 1374-7205-00(KF10_KF20_KF10R_KF20R)_EN_V4:_ 2014.11.20 10:16 A • The Push-to-Test button accurately tests all smoke alarm func- tions. DO NOT use any other test method. Test smoke alarm week- ly to ensure proper operation. • This smoke alarm should be installed only by a qualified electrician.
-
Page 3: How To Install This Smoke Alarm
BS 7671 published by the Institution of Electrical Engineers. WARNING: If a Firex Rechargeable alarm is replacing an earlier non rechargeable model, the new cable harness with 4 strands must be used. Using the old 3 strand harness will not allow new rechargeable alarm to charge it's batteries. - Page 4 MODELS KF10, KF10LL, KF20, KF20LL cable with electrical tape and tuck into pattress. Steps 6-9 for Models KF10, KF10LL, KF20, KF20LL ONLY: 6. Lift open battery pocket door. 7. Connect new 9-volt battery to battery connector inside battery pocket. BE SURE BATTERY IS SECURELY CONNECTED.
-
Page 5: Maintenance And Cleaning
REQUIRES YOUR IMMEDIATE ATTENTION AND ACTION. MAINTENANCE AND CLEANING In addition to weekly testing, Models KF10 and KF20 also require periodic bat- tery replacement. Regularly clean smoke alarm to remove dust, dirt, and debris. WARNING: Alarm comes equipped with a dust cover,... -
Page 6: Practice Fire Safety
If the smoke alarm is no longer under guarantee, have a qualified electrician replace the smoke alarm immediately with a comparable Firex smoke alarm. PRACTICE FIRE SAFETY If the smoke alarm sounds its alarm horn, and you have not pushed the test button, it is warning of a dangerous situation. -
Page 7: What To Do In Case Of A Fire
This will remove your protection. Fan the air or open a win- dow to remove smoke or dust. For Models KF10, KF10LL, KF10R, KF20, KF20LL and KF20R you may also use the Hush Button feature to quiet unwanted alarms. - Page 8 IF THE LOSS OR DAMAGE IS CAUSED BY ITS NEGLIGENCE OR FAULT. Return units freight prepaid to your local reseller. For information on your local reseller in the U.K. and Republic of Ireland, contact: FIREX PRODUCTS KIDDE SAFETY EUROPE LIMITED Mathisen Way Colnbrook, Berkshire SL3 0HB United Kingdom Tel.: +44 (0) 1753 685148...