Registration Information; Setting The Bluetooth Standby Mode; Setting The Bluetooth Signal - Sony MHC-V4D Operating Instructions Manual

To disconnect the Bluetooth device
Press BLUETOOTH on the unit.
"BT AUDIO" appears in the display
panel.
Depending on the Bluetooth device, the
Bluetooth connection may be canceled
automatically when you stop playback.
Erasing all the pairing

registration information

Use the buttons on the unit to perform this
operation.
1
Press BLUETOOTH to select
Bluetooth function.
"BT AUDIO" appears in the display
panel.
If the system is connected to a
Bluetooth device, the Bluetooth device
name appears in the display panel.
Press BLUETOOTH to disconnect the
Bluetooth device.
2
Hold down X and DJ EFFECT for
about 3 seconds.
"BT HIST CLEAR" appears in the
display panel and all the pairing
information is erased.
Setting the Bluetooth
standby mode
The Bluetooth standby mode enables the
system to turn on automatically when you
establish the Bluetooth connection from a
Bluetooth device.
1
Press OPTIONS.
2
Press / repeatedly to select
"BT STBY", then press
3
Press / repeatedly to select
"ON" or "OFF", then press
4
Press "/1 to turn off the system.
When Bluetooth standby mode is set to
on, the system waits for a Bluetooth
connection even when the system has
been turned off. When a Bluetooth
connection is established, the system
turns on automatically.
Setting the Bluetooth
signal
You can connect to the system from a
paired Bluetooth device in all functions
when Bluetooth signal is set to on. The
Bluetooth signal is turned on by default.
Use the buttons on the unit to perform this
operation.
Hold down X and
3 seconds.
"BT ON" or "BT OFF" appears in the
display panel.
Notes
• You cannot perform the following operations
when Bluetooth signal is set to off:
– Pairing with Bluetooth device
– Erasing the pairing information
– Using "SongPal" via Bluetooth
• When the Bluetooth signal is set to off, this
system cannot be detected and connection
cannot be established from Bluetooth device.
• If you touch the system with an NFC-
compatible smartphone or set the Bluetooth
standby mode to on, the Bluetooth signals will
set to on automatically.
.
.
+ for about
37
GB