Canadian English Or Canadian French Ratings; Change Pin; Pc Settings - Emerson LF320EM4 A Owner's Manual

Canadian English or Canadian French Ratings

You can select the Rating for Canadian English or Canadian French
broadcasting.
3
Use to select Canadian English rating or Canadian French
rating, then press OK.
4
to select the desired rating, then press OK repeatedly to
Use
switch between View and Block.
• indicates that the Rating is Locked.
• indicates that the Rating is Not Locked.
Canadian Canadian
Description
English rating French rating
All
Locked all ratings
E Exempt program
C –
For all children
C8+ –
For children over 8
G
General audience
– 8ans+ Unsuitable for ages under 8
PG –
Parental guidance suggested
– 13ans+
Unsuitable for ages under 13
14+ – Unsuitable for ages under 14
– 16ans+
Unsuitable for ages under 16
18+ 18ans+
Adult audience only
Note(s)
• The V-Chip can block non rated programs as per "CEA-608-E sec. L.3". If the option
to block NR, None or E programs is used in US movie ratings lock, US TV ratings
lock, Canadian English rating or Canadian French rating accordingly "unusual results
may occur and the unit may not receive emergency bulletins or other types of
programming": / Emergency Bulletins (Such as EAS messages, weather warnings and
others) / Locally originated programming / News / Political / Public Service
Announcements / Religious / Sports / Weather.

Change PIN

Although the default PIN code (0000) is supplied with the unit, you can
set your own PIN code.
3
Use to select Change PIN, then press OK.
4
Press the NUMBER keys to enter the new 4-digit PIN code.
• Enter PIN code again in Confirm PIN. entry field.
Picture
Sound
Setup
Features
Language
USB
Note(s)
• Make sure to Enter a PIN code and the Confirm PIN code must be exactly the same.
If they are different, the space is cleared to reenter the new PIN code.
• When a Power Failure occurs the PIN code will be erased and Unit returns to the
default PIN code (0000) when a power failure occurs.
• If you forget the PIN code, unplug the AC Power cord then wait for 10 seconds to
plug the AC Power cord in again.
The unit will restore the PIN code to 0000 (factory default). Then repeat the Change
PIN procedure to setup a new PIN code.
Enter PIN.
Confirm PIN.
PIN Code Back

PC settings

This function lets you adjust the PC screen position, clock and phase
during PC Input.
to adjust Clock setting to stabilize the PC screen and Phase
Use
setting to improve the clarity of the PC screen.
1
Use to select PC settings, then press OK.
Picture Auto adjustment
Sound
Setup Horizontal position
Features Vertical position
Language Clock
USB Phase
2
to select the item you want to adjust, then press OK.
Use
• The horizontal/vertical position, clock and phase of the PC
screen are automatically adjusted.
Auto adjustment
Select if you want to adjust automatically.
Cursor
Horizontal position to move PC screen left
to move PC screen
Vertical position
down
Clock
to decrease setting value to increase setting value
Phase
Note(s)
• You may not obtain an appropriate screen with Auto adjustment for some signals. In
this case, adjust the settings manually.
• Adjust Phase setting after Clock setting has been properly adjusted.
27
English
0
0
0
0
Cursor
to move PC screen right
to move PC screen up
Continued on next page.