Absima CR4T User Manual page 37

„Throttle" activate:
Tap the button "activate / deactivate". Pull the throttle/brake trigger forward or backward and hold the desired position.
Tap the button "back" in order to save the changes and return to the menu.
„Throttle" deactivate:
Select the function "throttle". Tap the button "activate / deactivate" to deactivate the set value.
„Display sensors":
his feature displays all the information about all connected sensors.
„Choose sensors":
This function displays information from up to four sensors on the main screen. Tap the parameters and select the
desired sensor.
„Speed and distance":
This feature allows you to program an tachometer connected to the receiver and a displacement measuring device.
Tap on the "Speed sensor" to select a tachometer. "None" means that no one has been selected.
Tap the "Set rotation length" to the circumference of the tire, where the tachometer is connected to cease.
Tap on "Reset odometer 1" or "reset odometer 2" to the virtual odometer again set to "0".
„Servo setup":
This feature allows you to connect the servo system to an external serial interface. This serves as a channel for the
servos. Tap the desired parameters to assign them an external serial interface.
„Servos frequency":
This feature allows you to adjust the servo frequency. Therefor tap on the desired frequency.
37