Absima CR4T User Manual page 32

Picture 29
„Master channel":
Here the master channel is selected.
„Slave channel":
Here the slave channel is selected.
„Low side mix":
Here the influence of the left master channel is mixed on the slave channel. A value of 50% shares of the
impact on both channels.
„High side mix":
Here the influence of the right master channel is mixed on the slave channel. A value of 50% shares of the
impact on both channels.
„Offset":
Here is an offset value is added to the slave channel. A negative value shifts the slave channel to its smallest
point.
32