Intergas ECO RF 24 Operating Instructions

Hide thumbs Also See for ECO RF 24:

Table of Contents

Combi Compact

ECO RF 24

ECO RF 30

ECO RF 36

Operating Instructions

Installation of the appliance may only be carried out by an installer/competent person.

Please ask your installer to instruct you on how to fill and bleed the appliance and the

installation and on their operation. Strictly abide by all the instructions and warnings.

Always use the appliance in accordance with the Operating Instructions. It is forbidden to

interfere with a sealed component.

CONTENTS

Operation of the appliance

1.1 Operation of the central heating ................................................................. 2

1.2 Operation of domestic hot water supply ..................................................... 2

Operation and display read-out

2.1 Operating mode on the service display ...................................................... 3

2.2 Changing the settings of the various functions ........................................... 3

Start-up

Faults

Filling and bleeding appliance and installation

5.1 Central heating system ............................................................................... 4

5.2 Domestic hot water supply .......................................................................... 4

5.3 Frost protection ........................................................................................... 4

Maintenance

Subject to change.

Table of Contents

Need help?

Do you have a question about the ECO RF 24 and is the answer not in the manual?

Page 1 2.2 Changing the settings of the various functions ........... 3 Start-up Faults Filling and bleeding appliance and installation 5.1 Central heating system ................4 5.2 Domestic hot water supply ................4 5.3 Frost protection ................... 4 Maintenance © 2013 Intergas Heating Ltd Subject to change.
Page 2 OPERATION OF THE APPLIANCE The purpose of the Intergas Combi Compact ECO RF wall mounted gas fired boiler is to heat water and to supply it to the central heating (CH) system and the domestic hot water (DHW) taps. Any use deviating from the intended use by the manufacturer may result in product damage or unsafe situations and will void the warranty.
Page 3 Operating mode on the service display: — Off (appliance frost protection active) Ventilate Wait mode Ignite CH pump post run CH mode Desired temperature reached DHW mode Self test Heat up appliance Note: When the red LED above the reset key flashes a fault has occurred. A fault code will then appear on the temperature display. Changing the settings of the various functions Keeping the key pressed for 2 seconds takes you to the user settings menu (LED at...
Page 4 Always use a Gas Safe registered engineer to fit, fix or service your gas appliance. To find or check an engineer call Gas Safe Register’s free helpline on 0800 408 5500 or visit www.GasSafeRegister.co.uk. Intergas boilers are manufactured in a Kiwa ISO 9001 certified production faccility. Intergas Heating Ltd...