Download Print this page

Infantino Breathe Owners Manual Instructions page 9

Hide thumbs Also See for Breathe:

Advertisement

Available languages

Available languages

8.
While supporting the baby with one hand, wrap
the carrier around the baby so that the child's
free leg is below the "side closure buckle" and
his/her arm is above it. Secure the side by first
pressing the "hook & loop (inside the carrier
body)" to its mate, the "hook & loop (on the
shoulder strap flap)" then by fastening the
"side closure buckle". You will hear a 'click'
when the buckle is locked in position.
9.
Support the baby's head by attaching the two
"head support buckles" above each arm. You
will hear a 'click' when the buckle is locked in
position. Customize the firmness of the head
support by adjusting both of the "head support
tighteners."
* IMPORTANT! Always make sure there is enough
room around your baby's face to provide a clear
source of air.
10.
Attach the "leg loops" to the "leg loop buttons"
on BOTH SIDES of the carrier. (For babies over 11
lbs or 5 kgs, this step is unnecessary.) If the leg
opening appear loose with the "leg loops"
attached, they can be adjusted somewhat by
tightening the "side closure buckles" on both
sides.
* IMPORTANT! For babies between 8-11 lbs, the leg
loops must be attached to make the leg hole smaller
and to avoid a potential falling hazard.
11.
To adjust how high the baby rides on your chest,
lift the baby slightly and pull the "shoulder strap
end" forward, first on one strap, then on the
other. When the baby is properly positioned,
you should be able to tilt your head forward
and kiss the top of your baby's head.
7.

Advertisement

loading