Usb Configuration - ECS Z77H2-A2X Deluxe User Manual

USB Configuration

Use this item to show the information of USB configuration.
Main
Main
Super IO Configuration
USB Configuration
Super IO Chip
All USB Devices
Serial Port 0 Configutation
Parallel Port Configutation
OnChip USB 3.0 Controller
Legacy USB Support
All USB Devices (Enabled)
Use this item to enable or disable all USB devices.
OnChip USB 3.0 Controller (Enabled)
Use this item to enable or disable onchip USB 3.0 controller. We recommand users
to keep the default value. Disabling it might cause the USB devices not to work prop-
erly.
Legacy USB Support (Enabled)
Use this item to enable or disable support for legacy USB devices. Setting to Audio
allows the system to detect the presence of the USB device at startup. If detected,
the USB controller legacy mode is enabled. If no USB device is detected, the legacy
USB support is disabled.
Press <Esc> to return to the Advanced Menu page.
44
Advanced Chipset
Advanced Chipset
Z77H2-A2X Deluxe USER MANUAL
M.I.B III Boot
M.I.B X Boot
IT8728
Enabled
Enabled
Enabled
Security Save & Exit
Security Exit
Enabled or Disabled
Set Parameters of Serial
USB Support Parameters
Parallel Port (LPT/LPTE).
Port 0 (COMA)
: Select Screen
: Select Screen
/Click: Select Item
/Click: Select Item
Enter/Dbl Click : Select
+/- : Change Opt.
Enter/Dbl Click : Select
F1: General Help
+/- : Change Opt.
F2: Previous Values
F1: General Help
F3: Optimized Defaults
F2: Previous Values
F4: Save & Exit
F3: Optimized Defaults
ESC/Right Click: Exit
F4: Save & Exit
ESC/Right Click: Exit