Disassembly And Storage; Removing The Trailer - InStep 12-IS001TGB Owner's Manual

6

Disassembly and Storage

REMOVING THE TRAILER

❶ Remove the child from the passenger compartment.
❷ Un-clip the tow bar safety strap, un-loop it from the bicycle.
Clip it back on the ring on the end of the tow bar. Figure 6.1
Safety strap clip
2
Tow bar ring
❸ Unsnap the safety loop and remove the locking pin from the
tow bar coupler plate and tow bar. Figure 6.2
Safety loop secured to pin
❹ Remove the tow bar from the tow bar coupler plate.
Figure 6.3
19
Bicycle frame
Figure 6.1
3
Figure 6.2
Note: all views are looking
down on the tow bar.
Tow bar
❺ Re-insert the locking pin into the holes on the end of the tow
bar. Snap the safety loop onto the locking pin. Figure 6.4
Safety pin
Safety loop secured to pin
❻ If desired, leave the coupler plate on the bicycle for future
use. It is not necessary to remove when storing.
Coupler
plate
4
Figure 6.3
5
Figure 6.4