Restore On Ac/Power Loss; Resume On Lan; Resume On Rtc Alarm - VIA Mainboard ARTiGO-A1150 User Manual

Restore on AC/Power Loss

Restore on AC/Power Loss defines how the system will respond
after AC power has been interrupted while the system is on. There
are three options.
Power Off Power Off
Power Off Power Off
The Power Off option keeps the system in an off state until the
power button is pressed again.
Power On Power On
Power On Power On
The Power On option restarts the system when the power has
returned.
Last State Last State
Last State Last State
The Last State option restores the system to its previous state when
the power was interrupted.

Resume on LAN

Resume on LAN allows to turned on a system that has been put
into suspend or standby mode. When this feature is enabled, LAN
activity as defined in the Resume on LAN
system to wake up. This feature has three options.
S S S S 1 1 1 1
The S1 option enables LAN activity to be detected if the system is
in S1 power saving mode.
S1/ S1/S3/S4/S5 S1/ S1/ S3/S4/S5 S3/S4/S5 S3/S4/S5
The S1/S3/S4/S5 option enables LAN activity to be detected if the
system is in S1/S3/S4/S5 power saving mode.
Disabled Disabled
Disabled Disabled
The Disabled option disables the detection of all LAN activity.

Resume on RTC Alarm

Resume on RTC Alarm can only be used if Resume on Software
RTC Alarm RTC Alarm RTC Alarm RTC Alarm is not enabled. This feature enables the BIOS to
automatically power on the system at a scheduled time. When
enabled, the RTC Alarm Date RTC Alarm Date and System Time RTC Alarm Date RTC Alarm Date
unlocked.
Resume on LAN feature will cause the
Resume on LAN Resume on LAN
Resume on Software Resume on Software Resume on Software
System Time features will be System Time System Time
46