VIA Mainboard ARTiGO-A1150 User Manual page 37

Step 5 Step 5 Step 5 Step 5
First reinstall the fan duct, and connect the grounding cable to one
of the screws of the fan duct as indicated in the figure below. Then
attach the front panel plate and secure it with screws.
Note:
Make sure the WLAN USB cable is properly routed underneath
the fan duct.
Step 6 6 6 6 Step
Step Step
Locate the WLAN antenna hole at the rear side of the chassis and
install the WLAN antenna.
2
1
3
29