Table of Contents
Advertisement
I/O P
D
IN
ESCRIPTION
Power Button
The ARTiGO-A1150 comes with a Power On/Off
button, that supports Soft Power-On/Off (Instant
Off or 4-Second Delay) and Suspend.
LED Indicators (Power LED and HDD LED)
There are two LEDs on the front face
plate that indicate the system status: The
Power LED indicates the power status
and flashes in green. The HDD LED
indicates the hard disk status and flashes
in red.
USB device port
The ARTiGO-A1150 provides a USB device port in the front panel for
quick data transfer to another computer.
Pin
Signal
1
+5VUSBD
2
USBDP-
3
USBDP+
4
USBID
5
GND
USB 2.0 ports
The ARTiGO-A1150 provides four USB 2.0 ports (two in the front
panel, and two in the rear panel) for Plug & Play and hot
swapping access to external devices. The USB interface complies
with USB UHCI, Rev. 2.0.
Pin
Signal
1
VCC
2
USB_P0-
3
USB_P0+
4
GND
11
Advertisement
Table of Contents
