Set/Retrieve Radio Presets; Alarm Operation - Hello Kitty KT2052P User Manual

SET/RETRIEVE RADIO PRESETS

1. Use the [- TUNING +] button to select the desired radio station.
2. Press and hold the [MEMORY] button; the preset memory number will flash in the
LED display.
3. Press the UP or DOWN button to change to the desired preset number.
4. Press the [MEMORY] button again to save the current radio station to the desired
preset station.
5. Repeat steps #1 to #4 to set up to 10 stations.
6. To retrieve the preset stations already programmed, press [AUTO SCAN] button
and then UP or DOWN button to select the desired preset station.
7. When you finished listening, hold [RADIO FM/AM] button for two seconds to turn off
the Radio.
ANTENNA INFORMATION
AM - The AM bar antenna is inside the radio. If AM reception is weak, change the
position of the entire radio until the internal antenna picks up the strongest signal.
FM - The FM antenna is built into to the AC power cord. If FM reception is weak, try
varying the position and direction of the power cord until you find the strongest
signal.
1. When the radio is off, press ALARM1 button, the indicator of ALARM1and the
alarm time flash.
2. Hold the ALARM 1 button when the alarm time is flashing, the HOUR digits will
flash (MINUTE digits become solid). Press UP or DOWN button to set the alarm
Hour.
3. Press the ALARM 1 button, the MINUTE digits will flash (HOUR digits become
solid). Press UP or DOWN button to set the alarm Minute.
4. Press the ALARM 1 button, the Buzzer alarm sound indicator will flash as below:
PM
ALARM1
5. Press UP or DOWN button to select the alarm sound between Buzzer and Radio.
Press the ALARM 1 button to confirm the alarm setting. The ALARM 1 indicator will
be on. When the alarm time is reached, the ALARM1 indicator will flash and the
Buzzer or Radio will sound.

ALARM OPERATION

7
SLEEP
ALARM2