Location Of Controls And Indicators; Setting The Clock; Listening To The Radio; Power Connection - Hello Kitty KT2052 User Manual

LOCATION OF CONTROLS AND INDICATORS

1. AM Indicator
2. ALARM 'ON' Indicator
3. LED CLOCK Display
4. Battery Compartment
(At Bottom of Cabinet)
5. AC Power Cord
6. NIGHT LIGHT
7. FUNCTION Selector
(OFF/ON/ AUTO/ BUZZER)
8. VOLUME Control
9. NIGHT LIGHT Switch
- 5 -
10. HOUR Button
11. MIN (MINUTE) Button
12. SNOOZE Button
13. TIME Adjustment Button
14. ALARM Button
15. SLEEP Button
16. Speaker (At Rear Cabinet)
17. BAND Selector (AM/FM)
18. TUNING Control
- 6 -

POWER CONNECTION

Plug the AC cord of the radio into a 120V~ 60Hz AC power outlet socket.
When you connect the radio to your AC outlet for the first time the clock display will
begin flashing "12:00". The flashing will stop when you set the time.
1. Depress the TIME button and the HOUR button to set the correct Hour.
2. Depress the TIME button and the MIN button to set the correct Minute.
AM Indicator
Alarm Indicator
NOTE: Be sure to observe the AM indicator to make sure that the time is set correctly
for AM or PM. If the AM indicator is 'On', the time displayed is "AM". If the AM indicator
is 'Off, the time displayed is "PM ".

LISTENING TO THE RADIO

1. Set the BAND Selector to the desired band, AM or FM.
2. Set the VOLUME Control to a low setting.
3. Slide the FUNCTION Selector to the ON position.
4. Select your desired station with the TUNING Control.
5. Adjust the VOLUME Control to the desired listening level.
6. When you have finished listening, slide the FUNCTION Selector to the "OFF"
position to turn the radio 'Off"
ANTENNA INFORMATION
AM - The AM bar antenna is built inside the radio. If AM reception is weak, change
the position of the radio until the internal antenna picks up the strongest signal.
FM - The FM antenna is built-in to the AC power cord. If FM reception is weak, try
varying the position and direction of the power cord until you find the strongest
signal.
- 6-

SETTING THE CLOCK

- 7 -